Gate hinges do more than allow a gate to swing. Their size directly affects load capacity, alignment, smooth movement, and long-term durability. Hinges that are too small can cause sagging, binding, or early failure, while oversized hinges may be unnecessary and harder to install. Choosing the right hinge size is about matching the hinge to the gate’s weight, width, material, and usage.

Yes, you can tighten door hinges, and it is one of the most common and effective ways to fix door problems such as sagging, squeaking, rubbing, or poor latching. In many cases, tightening the hinges is the first and simplest step before considering more complex repairs.

Yes, you can shim door hinges, and it is a common, effective method for correcting minor door alignment problems without replacing hardware or removing the entire door

Yes, you can replace door hinges without fully removing the door—but it depends on the hinge type, door weight, and the condition of the frame and screws. In many cases, especially for standard residential doors, hinges can be replaced one at a time while the door remains supported in place.

Yes, a piano hinge can be cut to a custom length. In fact, piano hinges are often supplied in long, continuous sections specifically so they can be trimmed to fit doors, lids, panels, or enclosures of different sizes.

Cabinet doors are used frequently and are subject to constant movement, temperature changes, and material expansion. Over time, doors may become misaligned, causing uneven gaps, rubbing, sagging, or difficulty closing. In most cases, these issues are not caused by faulty cabinets but by hinges that need proper adjustment.

T hinges are widely used on gates, shed doors, barn doors, cabinets, and utility enclosures. Their distinctive T-shaped design provides added strength and load distribution, especially for wider or heavier doors. Measuring a T hinge correctly is essential to ensure proper fit, balanced weight support, smooth operation, and long service life.

Gate hinges play a critical role in the stability, alignment, and long-term performance of metal and wooden gates. Incorrect hinge sizing can lead to sagging, uneven movement, excessive wear, or premature failure. Proper measurement ensures that the hinge can support the gate’s weight, match the gate structure, and operate smoothly over time.

A bifold hinge is a specialized hinge used to connect two panels that fold together as a single unit. It is commonly applied in bifold doors, folding cabinets, partitions, and compact access systems where space efficiency and smooth movement are required.

Fire doors are a critical part of passive fire protection systems in buildings. Their purpose is to slow the spread of fire and smoke, protecting escape routes and buying time for evacuation. While much attention is given to fire-rated door leaves and frames, hinges are equally essential components.

A lever door handle is a type of door hardware that operates by pressing a horizontal lever rather than turning a round knob.

​As international construction, refurbishment, and door-hardware markets continue to grow, a seemingly simple question has become one of the most searched and debated topics among contractors, architects, hardware distributors, and facility managers: Which way do lever handles go?